市场简讯
表中第四栏的“DOC”为“被替代标准的推断符合性中止期”：对于新版标准，到达该日期，被替代标准（旧版标准）及其增补件将不再具有推断符合性；对于标准的增补件，达到该日期，标准必须与此增补件一起使用，才具有推断符合性。我们从表中也可以看出，在欧盟，一般新标准与旧标准的过渡期为三年，譬如2013年发布的标准，其执行日期通常为2016年。 标准编号 标准名称 采用国际标准 DOC EN ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation ISO 11252:2013 EN 50085-1:2005/A1:2013 Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements 2016-05-20 EN 50117-1:2002/A2:2013 Coaxial cables — Part 1: Generic specification 2016-06-17 EN 50117-2-1:2005/A2:2013 Coaxial cables — Part 2-1: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz - 1 000 MHz 2016-07-01 EN 50117-2-2:2004/A2:2013 Coaxial cables — Part 2-2: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -1 000 MHz 2016-07-01 EN 50117-2-3:2004/A2:2013 Coaxial cables — Part 2-3: Sectional specification for cables used in cabled distribution networks — Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz 2016-07-01 EN 50117-2-4:2004/A2:2013 Coaxial cables — Part 2-4: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz -3 000 MHz 2016-07-01 EN 50117-2-5:2004/A2:2013 Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -3 000 MHz 2016-07-01 EN 50117-4-1:2008/A1:2013 Coaxial cables — Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 — Indoor drop cables for systems operating at 5 MHz - 3 000 MHz 2016-06-17 EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification 2016-03-18 EN 50288-2-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables 2016-03-18 EN 50288-2-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables 2016-03-18 EN 50288-3-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables 2016-03-18 EN 50288-3-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables 2016-03-18 EN 50288-4-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables 2016-03-18 EN 50288-4-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables 2016-03-18 EN 50288-5-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables 2016-03-18 EN 50288-5-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables 2016-03-18 EN 50288-6-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables 2016-03-18 EN 50288-6-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables 2016-03-18 EN 50290-2-23:2013 Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables 2016-09-16 EN 50290-2-25:2013 Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables 2016-09-16 EN 60061-1:1993/A49:2013 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps IEC 60061-1:1969/A49:2013 2016-04-02 EN 60061-2:1993/A46:2013 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 2: Lampholders IEC 60061-2:1969/A46:2013 2016-04-02 EN 60061-3:1993/A47:2013 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 3: Gauges IEC 60061-3:1969/A47:2013 2016-04-02 EN 60127-4:2005/A2:2013 Miniature fuses — Part 4: Universal modular fuse-links (UMF) — Through-hole and surface mount types IEC 60127-4:2005/A2:2012 2016-01-11 EN 60127-7:2013 Miniature fuses — Part 7: Miniature fuse-links for special applications IEC 60127-7:2013 EN 60143-2:2013 Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks IEC 60143-2:2012 2016-01-15 EN 60252-1:2011/A1:2013 AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guidance for installation and operation IEC 60252-1:2010/A1:2013 2016-10-03 EN 60252-2:2011/A1:2013 AC motor capacitors — Part 2: Motor start capacitors IEC 60252-2:2010/A1:2013 2016-10-03 EN 60335-2-2:2010/A1:2013 Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2009/A1:2012 2015-12-20 EN 60335-2-6:2003/A13:2013 Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances 2015-11-20 EN 60335-2-7:2010/A1:2013 Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines IEC 60335-2-7:2008/A1:2011 (Modified) 2015-11-20 EN 60335-2-17:2013 Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC 60335-2-17:2012 2015-04-30 EN 60335-2-27:2013 Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC 60335-2-27:2009 (Modified) 2014-11-21 EN 60335-2-34:2013 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors IEC 60335-2-34:2012 2015-06-27 EN 60432-3:2013 Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle) IEC 60432-3:2012 2015-08-08 EN 60519-4:2013 Safety in electroheating installations — Part 4: Particular requirements for arc furnace installations IEC 60519-4:2013 2016-07-24 EN 60519-10:2013 Safety in electroheating installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2013 2016-03-29 EN 60519-12:2013 Safety in electroheating installations — Part 12: Particular requirements for infrared electroheating installations IEC 60519-12:2013 EN 60529:1991/A2:2013 Degrees of protection provided by enclosures (IP Code) IEC 60529:1989/A2:2013 2016-10-03 EN 60598-2-8:2013 Luminaires — Part 2-8: Particular requirements — Handlamps IEC 60598-2-8:2013 2016-06-03 EN 60598-2-11:2013 Luminaires — Part 2-11: Particular requirements — Aquarium luminaires IEC 60598-2-11:2013 2016-06-20 EN 60598-2-12:2013 Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights IEC 60598-2-12:2013 2016-06-03 EN 60598-2-24:2013 Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures IEC 60598-2-24:2013 2016-07-24 EN 60670-1:2005/A1:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements IEC 60670-1:2002/A1:2011 (Modified) 2017-12-31 EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment IEC 60670-24:2011 (Modified) EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals IEC 60688:2012 EN 60695-2-10:2013 Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure IEC 60695-2-10:2013 EN 60695-11-10:2013 Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods IEC 60695-11-10:2013 2016-06-25 EN 60934:2001/A2:2013 Circuit-breakers for equipment (CBE) IEC 60934:2000/A2:2013 2016-02-22 EN 60947-2:2006/A2:2013 Low-voltage switchgear and controlgear — Part 2: Circuit-breakers IEC 60947-2:2006/A2:2013 2016-03-07 EN 60947-5-5:1997/A11:2013 Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function 2015-12-03 EN 60950-1:2006/A2:2013 Information technology equipment — Safety — Part 1: General requirements IEC 60950-1:2005/A2:2013 (Modified) 2016-07-02 EN 60968:2013 Self-ballasted lamps for general lighting services — Safety requirements IEC 60968:2012 2015-10-31 EN 60974-2:2013 Arc welding equipment — Part 2: Liquid cooling systems IEC 60974-2:2013 2016-02-28 EN 60974-5:2013 Arc welding equipment — Part 5: Wire feeders IEC 60974-5:2013 2016-06-27 EN 60974-7:2013 Arc welding equipment — Part 7: Torches IEC 60974-7:2013 2016-02-28 EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment IEC 61010-2-201:2013 2016-04-01 EN 61034-2:2005/A1:2013 Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements IEC 61034-2:2005/A1:2013 2016-05-26 EN 61195:1999/A1:2013 Double-capped fluorescent lamps — Safety specifications IEC 61195:1999/A1:2012 2015-11-16 EN 61199:2011/A1:2013 Single-capped fluorescent lamps — Safety specifications IEC 61199:2011/A1:2012 2015-11-01 EN 61347-1:2008/A2:2013 Lamp controlgear — Part 1: General and safety requirements IEC 61347-1:2007/A2:2012 2016-01-01 EN 61347-2-9:2013 Lamp controlgear — Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) IEC 61347-2-9:2012 2015-12-04 EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 61439-4:2012 2015-12-20 EN 61535:2009/A1:2013 Installation couplers intended for permanent connection in fixed installations IEC 61535:2009/A1:2012 2015-06-20 EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2013 2016-06-03 EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures —Part 14: Equipment for testing the safety of electrical equipment of machinery IEC 61557-14:2013 EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof — Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers IEC 61558-2-14:2012 EN 61558-2-16:2009/A1:2013 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units IEC 61558-2-16:2009/A1:2013 2016-09-16 EN 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes IEC 61558-2-26:2013 EN 61643-21:2001/A2:2013 Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods IEC 61643-21:2000/A2:2012 2015-08-31 EN 61730-1:2007/A2:2013 Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction IEC 61730-1:2004/A2:2013 2016-04-18 EN 62026-2:2013 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i) IEC 62026-2:2008 (Modified) EN 62026-7:2013 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet IEC 62026-7:2010 (Modified) EN 62031:2008/A1:2013 LED modules for general lighting — Safety specifications IEC 62031:2008/A1:2012 2015-12-03 EN 62040-1:2008/A1:2013 Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS IEC 62040-1:2008/A1:2013 2016-02-14 EN 62196-1:2012/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements 2017-10-15 EN 62196-2:2012/A11:2013 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles —Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories 2017-10-15 EN 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements IEC 62395-1:2013 2016-10-14 EN 62444:2013 Cable glands for electrical installations IEC 62444:2010 (Modified) 2016-09-23 EN 62606:2013 General requirements for arc fault detection devices IEC 62606:2013 (Modified) HD 60269-2:2013 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to K IEC 60269-2:2013 (Modified) 2016-08-15 HD 60269-3:2010/A1:2013 Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) — Examples of standardized systems of fuses A to F IEC 60269-3:2010/A1:2013 2016-03-05 信息来源：技术壁垒资源网 2014.7.8 |
厦门市进出口商会 / 厦门市食品行业协会 / 厦门市会议展览业协会 / 厦门市钢铁贸易协会 / 厦门技术性贸易措施信息网
